BONDALL BEATMOLD – Mold and Moss Remover & Stone Protection Solution | 500ml

BeatMOLD is a cleaning and protective solution for stone and building surfaces, specially formulated to effectively eliminate moss and mold.

Advantages

• Effectively eliminates mold and moss.

• Helps prevent moss regrowth.

• Creates ideal wall surface conditions for new buildings.

• Prepares a mold-free surface before painting.

Application Areas

• Side walls

• Concrete walls

• Concrete roof decks and rooftops

• Brick surfaces

• Natural stone surfaces

Coverage: 1 kg covers approximately 5–10 m².

Available Sizes: 500 ml | 1 kg | 4 kg

Directions for Use

1. Apply BeatMOLD to the entire surface using a brush, broom, or sprayer. Do not limit application to areas where mold is visible, as mold spores may still be present on apparently clean surfaces.

2. Leave the BeatMOLD coating for at least 24 hours to help ensure thorough mold elimination.

3. Afterward, clean the surface using a high-pressure washer or scrub it with water and detergent.

Application Before Painting

1. Prepare a solution by mixing 1 part BeatMOLD with 2 parts water.

2. Apply the solution to the cleaned surface.

3. Allow the surface to dry completely before painting to help ensure that mold spores have been eliminated.

Precautions

• Avoid direct contact with skin and do not inhale the vapors.

• Wear appropriate protective equipment, including gloves, a mask, and safety goggles.