Building Solutions: Why Does Concrete Quality Determine a Building’s Durability?

Building Solution: Why Concrete Quality Determines Building Durability

Concrete is a composite material primarily made up of cement, aggregates, and water. Under certain conditions, additives or admixtures may also be used to achieve specific characteristics.

Each component has its own role.

Cement acts as a binding material. Aggregates make up the largest portion of the concrete volume. Water is required for cement hydration and helps make the mixture workable. Meanwhile, certain additives can be used to improve concrete characteristics according to specific requirements.

If the proportions are incorrect, concrete quality may deteriorate.

One example is using too much water. Concrete may become easier to work with because the mixture is more fluid, but excess water can affect the pore structure after the concrete hardens.

Therefore, concrete that is easy to work with is not necessarily concrete of the highest quality.

Concrete quality must be evaluated comprehensively, including:

  • Mix proportions.

  • Material quality.

  • Water-to-cement ratio.

  • Mixing process.

  • Concrete placement.

  • Compaction.

  • Surface condition.

  • Curing.

  • Concrete joints.

  • Environmental conditions.

  • Application methods.

In other words, concrete quality is the result of the entire process, not just a single material.

What Determines Concrete Quality?

Several key factors must be considered when discussing concrete quality.

1. Mix Proportions

The concrete mix must be adjusted to suit the requirements of the work.

Cement, sand, gravel, water, and additives must be measured accurately. A mixture containing too much water, for example, may produce concrete with different characteristics compared with a mixture in which the water content is more carefully controlled.

Therefore, do not rely solely on visual estimates such as “it should not be too dry” or “it just needs to be easy to mix.”

In construction work, controlling mix proportions is an essential part of quality control.

2. Material Quality

The materials used also affect the final result.

Aggregates must be suitable for the intended application, while cement must be stored properly to prevent quality deterioration caused by moisture.

The water used must also be suitable for concrete mixing.

Poor-quality materials cannot always be compensated for simply by adding more cement.

3. Water Usage

Water plays an important role in cement hydration. However, the amount of water must be controlled.

Adding excessive water may make the mixture easier to work with, but it can affect the concrete structure after hardening.

Therefore, when a project requires workable concrete while keeping water usage under control, using a concrete admixture may be an approach worth considering.

4. Mixing Process

Uneven mixing can cause the materials to be distributed non-uniformly.

This may result in areas with different quality levels within the same concrete element.

Mixing must continue until the components are properly distributed in accordance with the construction method being used.

5. Compaction

After concrete is poured, compaction becomes an important step.

Insufficiently compacted concrete may develop voids or honeycombing. These defects affect not only the surface appearance but may also reduce the quality of the concrete element.

6. Curing

Curing is sometimes considered an additional step, even though it is an essential part of developing concrete quality.

Concrete requires suitable conditions to support hydration and strength development.

If concrete loses moisture too quickly or is exposed to unsuitable environmental conditions, the risk of problems such as surface cracking may increase.

The Relationship Between Water and Concrete Strength

One important consideration in concrete work is the relationship between water content and concrete quality.

Water is necessary in the mixture. However, its use must be controlled to prevent the concrete from becoming excessively fluid.

Simply put, the less controlled the water content, the more difficult it becomes to achieve consistent concrete quality.

This is one reason why superplasticizers or water-reducing admixtures are used in certain applications.

These admixtures can help produce a more workable mixture without requiring excessive additional water.

One solution worth considering is B-Ton, a concrete admixture from Bondall.

B-Ton is formulated as a water-reducing concrete admixture that helps accelerate early strength development while improving concrete strength and quality. According to Bondall's technical information, B-Ton can help reduce water requirements and improve concrete density.

Learn more about B-Ton from Bondall

Why Does Concrete Crack?

Concrete cracking is a relatively common problem in buildings.

However, it is important to understand that not all cracks have the same causes or level of risk.

Cracking can be influenced by various conditions.

Shrinkage Cracks

Concrete may undergo volume changes as water evaporates and hydration takes place.

If shrinkage is not properly controlled, cracks may develop on the surface.

Cracks Caused by Temperature Changes

Temperature changes can cause materials to expand and contract.

Under certain conditions, this movement can create stress that eventually leads to cracking.

Cracks at Joints Between Old and New Concrete

When new concrete is applied to existing concrete, bonding becomes particularly important.

The old concrete surface may already be hardened and contain pores, dust, dirt, or layers that reduce adhesion.

If the joint is not properly prepared, the new concrete may not bond optimally to the existing concrete.

Cracks Caused by Structural Movement

Structural movement, settlement, loading, or changes in building conditions can also cause cracks.

In these situations, simply filling the cracks with a particular material may not address the underlying cause.

Therefore, the type and cause of the cracks must be identified before determining the appropriate repair method.

Old and New Concrete: Why Is Bonding Important?

One situation frequently encountered during renovation and repair work is the need to connect new concrete to existing concrete.

Examples include:

  • Concrete patching.

  • Surface repairs.

  • Adding a new concrete layer.

  • Repairing damaged sections.

  • Plastering.

  • Applying a skim coat.

  • Joints between old and new concrete.

In these situations, surface quality is particularly important.

Existing concrete surfaces must be cleaned of dust, grease, oil, dirt, and any loose material.

Once the surface has been prepared, a bonding material can be used according to the requirements and the product's technical instructions.

Bondall offers Bondcrete, a multipurpose concrete bonding adhesive and sealer that can be used for bonding, sealing concrete pores, certain mixture applications, plastering, skim coating, and tile installation.

Learn more about Bondall Bondcrete

Understanding Bondcrete as a Concrete Bonding Solution

Bondcrete is one of Bondall's products in the Building Solution category.

It is designed as a multipurpose concrete bonding adhesive and sealer.

According to Bondall's product information, Bondcrete can be used for various applications, including:

  • Joints between old and new concrete.

  • Certain concrete mix applications.

  • Plastering and skim coating.

  • Sealing or closing concrete pores.

  • Tile installation adhesive.

  • Specific bonding applications.

Bondcrete is also available in different variants and package sizes to suit project requirements.

For concrete jointing or patching applications, Bondall provides specific dilution guidelines and emphasizes the importance of ensuring that surfaces are free from dust, dirt, grease, oil, and loose particles.

One important point to remember is that Bondcrete is not a replacement for a waterproofing membrane.

For example, if the problem is leakage through a concrete roof deck, Bondcrete may be part of the surface preparation or repair process, while the waterproofing requirement must be addressed using an appropriate waterproofing system.

Understanding B-Ton for Improving Concrete Mix Quality

In addition to bonding, concrete quality can also be improved through proper mix control.

B-Ton is a concrete admixture designed to help reduce water requirements, improve early strength, and enhance concrete quality and density.

According to Bondall's technical information, the recommended dosage of B-Ton is 1 kg for every four 50 kg bags of cement, or approximately 0.5% of the cement weight. However, actual usage on-site must